Back to FAQ

Document Set up – Part 6

Guide to Conceptual Design, Public Posts, Vectorworks jonathan

Setting Up Layers for the Building – You can set up the layers at any time. But, you will find it easier to set up the layer heights as soon as you can. The layer settings affect the walls and roof.

[ms-protect-content id=”34491,34492,34493, 34494, 34495, 34496, 344927″]
[FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept02_06.mov[/FMP]
[/ms-protect-content]

Related Posts

  • Document Set up - Part 4

    Setting Up Units For Primary And Secondary Units - Vectorworks has two settings for dimensioning, primary units and secondary units. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept02_04.mov[/FMP] [/ms-protect-content]

  • Document Set up - Part 3

    Setting The Smart Cursor Settings For Faster Drawing - There are several Smart Cursor settings. If you adjust them to suit your drawing style, you will find Vectorworks works very fast. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept02_03.mov[/FMP] [/ms-protect-content]

  • Document Set up - Part 5

    Creating Custom Dimension Standards - Custom dimension styles can be used instead of the standard dimensions. This allows you to create a dimension style that you like. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept02_05.mov[/FMP] [/ms-protect-content]

Leave a Comment