Back to FAQ

Site Modeling – Part 7

Guide to Conceptual Design, Public Posts, Vectorworks jonathan

Pads and Boundaries (Grade Limits) – Pads and boundaries (grade limits) are the main tools for site modifying. The pad creates the 3D site modifier and the boundary (grade limit) tells Vectorworks how much of the site will be affected.

[ms-protect-content id=”34491,34492,34493, 34494, 34495, 34496, 344927″][FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept05_07.mov[/FMP][/ms-protect-content]


Related Posts

  • Site Modeling - Part 4

    Site Model From a Survey and 3D Points - You can use a combination of tracing over the contours and placing spot levels. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"][FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept05_04.mov[/FMP][/ms-protect-content]

  • Site Modeling - Part 3

    Creating a Site Plan From a Polygon - If you can draw a polygon of the site, you can make it into a Property Line.  [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"][FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept05_03.mov[/FMP][/ms-protect-content]

  • Site Modeling - Part 2

    Drawing Simple Site Plans - The Property Line tool makes quick work of simple site plans. If the Sites do not have curves use this method. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"][FMP]https://s3.amazonaws.com/vectorworkout/Concept+Modeling/concept05_02.mov[/FMP][/ms-protect-content]

Leave a Comment