Roofs for standard houses are easy, but what if you don’t want a standard roof.…
Dealing with Roofs – Part 16
Flat Roofs – First, is the roof really flat. Even membrane roofs have a low pitch on them and as you want to use this 3D model to create accurate sections you may as well build the roof correctly, with a low pitch.
[ms-protect-content id=”34491,34492,34493, 34494, 34495, 34496, 344927″]
If you want to make the roof flat the easiest way is to use the Floor command. When using this method set the layer Z to be equal to the main floor Z and the layer delta Z can be anything. Then you can set the underside of the roof (floor) to be the stud height of the walls.
[FMP]https://s3.amazonaws.com/vectorworkout/Guide_to_Productivity/movie11_16.mov[/FMP]
[/ms-protect-content]