With this quickstart manual you will discover the tips, tricks, and tools you need to take your designs to the next level and impress your clients. Whether you're a seasoned pro or just starting out, this eBook is a must-read for anyone serious about their craft.
You need 2 things for cut and fill calculations, you need a site model and you need site modifiers. The first one should be obvious, with a out a site model Vectorworks has no way or calculating the site. The second part is, if the site is not modified, there is no cut and no fill.
[ms-protect-content id=”34491,34492,34493, 34494, 34495, 34496, 344927″]
[FMP]https://s3.amazonaws.com/vectorworkout/cadmovies/cadmovie245.mov[/FMP]
[/ms-protect-content]
Converting 2D polygons to 3D loci. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/cadmovies/cadmovie236.mov[/FMP] [/ms-protect-content]
Adding spot levels to make the site model more accurate. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496,…
adding a slope angle to a pad. [ms-protect-content id="34491,34492,34493, 34494, 34495, 34496, 344927"] [FMP]https://s3.amazonaws.com/vectorworkout/cadmovies/cadmovie244.mov[/FMP] [/ms-protect-content]