In this session, we worked out how to cut a profile into the edge of a slab, made a wall that went up at a slope before returning to vertical, showed how to manage stories when one floor is only 2 feet below another, demonstrated how to add profiles onto…
In this session, we covered creating site modifiers for a retaining wall, turning a complex roof into a gable roof, and using the Data Tag tool to get correctly scaled labels and add Dynamic Text to a tag.
In this workshop, we looked at how to assign room finishes to a space, how to change room finishes, and how to create a room finish schedule. You can find more information about room finishes here on the knowledgebase…
In this session, we looked at techniques for dealing with troublesome wall heights and joints, reviewed how the Section-Elevation Marker tool in Unconstrained Mode shows the option of linking to a viewport, and introduced working with Spaces and Space objects.
In this session, we showed how to modify a wall set up for stories to work with the Layer Elevation, introduced cut and fill, covered the benefits of using class filters, and quickly highlighted the Data Tag tool…. There is some valuable content here that you are missing out on…....
In this session, we showed how Working Planes can be used to model objects in the right place to start with. We also covered how to use the Extrude Along Path command to make footings and slab thickenings, and how to calculate their volume so that you know what the…
In this session, we covered how to make low resolution versions of plant image props so that your project files don’t get too big. We also went over how to make plant images more transparent so that they don’t distract from your proposed design and looked at where to go…
In this session, we reviewed the Screen Plane and Layer Plane, built a gutter and downspout—first, using extrusions and, then, using the Extrude Along Path command—and constructed a cone-shaped climbing gym, while experimenting with different methods and tools.
In this session, we covered how to set the Horizontal and Vertical settings to 1:1 under Page Setup, discussed the benefits of setting up Vectorworks with one drawing per sheet, talked about putting notes on the Design Layer versus the viewport’s Annotation window, demonstrated how to sort objects by location……...
In this session, we looked at adding blocks of text to Vectorworks, making irregular Section cuts, creating the look of interior wallpaper, as well as using stories, taking advantage of the levels of detail that you can build into a symbol, reviewing turning on and off class visibility through the…